drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. -.118 .102 -2,99 2,60 [ ] -.091 .083 -2,31 2,11 [ ] -.031 .024 -0,77 0,60 [ ] -.134 .118 -3,4 3,0 [ ] -.035 .028 -0,87 0,70 [ ] -.083 .067 -2,10 1,71 [ ] -.007 .005 -0,17 0,13 [ ] -.146 .130 -3,70 3,31 [ ] -.043 .020 -1,07 0,50 [ ] .004 [ 0,1 ] typ. typ. .059 1,5 [ ] .157 [ 3,99 ] .079 # .002 2,01 # 0,05 [ ] .157 [ 3,99 ] .138 # .002 3,51 # 0,05 [ ] .069 [ 1,75 ] .315 [ 8 ] .114 [ 2,9 ] typ. .142 [ 3,61 ] typ. .090 [ 2,29 ] .031 [ 0,79 ] typ. .059 [ 1,5 ] .028 [ 0,71 ] .043 [ 1,09 ] typ. .145 [ 3,68 ] .130 [ 3,3 ] typ. .437 [ 11,1 ] scale: 8.000 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .02 decimals (.xxx): # .004 angles: # 3 $ a power plcc-4 smt leds c-17824 sheet 1 of 1 family table: - - rev ecn no revisions drn ckd app date a new release ajf klj no 5-2-11 absolute maximum ratings at 25 $ c ambient led color units red orange yellow ingan green blue white continuous forward current 70 70 70 50 50 50 ma peak forward current ( t <10 s, d=0.1 for red, orange, yellow; d=0.005 for ingan green, blue) 100 100 100 400 300 300 ma linear derating from 70 $ c for red, orange, yellow; 60 $ c for ingan green, blue, white 1.16 1.16 1.16 0.80 0.80 0.80 ma/ $ c operating temperature -40 to +110 $ c storage temperature -40 to +110 $ c operating characteristics at 25 $ c ambient led characteristics color min. typ. max. units test conditions luminous intensity red 1120 1800 2800 mcd i f = 50 ma orange 1400 2240 4500 yellow 1120 1800 2240 ingan green 1120 1800 2240 i f = 30 ma blue 280 450 710 white 1120 1600 2240 peak wavelength red 634 nm i f = 50 ma orange 610 yellow 597 ingan green 520 i f = 30 ma blue 464 dominant wavelength red 620 625 630 nm i f = 50 ma orange 600 606 609 yellow 586 589 595 ingan green 516 525 540 i f = 30 ma blue 463 469 475 white see note 10 forward voltage red 1.90 2.15 2.50 v i f = 50 ma orange 1.90 2.15 2.50 yellow 2.05 2.15 2.65 ingan green 2.90 3.40 3.80 i f = 30 ma blue 2.90 3.40 3.80 white 2.90 3.30 3.80 viewing angle all 120 degrees dialight part number packaging led color 597-3029-202F sample strip red 597-3029-207f 7" reel 597-3209-202f sample strip orange 597-3209-207f 7" reel 597-3329-202f sample strip ingan green 597-3329-207f 7" reel 597-3409-202f sample strip yellow 597-3409-207f 7" reel 597-3609-202f sample strip blue 597-3609-207f 7" reel 597-3909-202f sample strip white 597-3909-207f 7" reel rohs compliant 597-3xx9-20xf part numbers with the "f" suffix ending are rohs compliant. for example: 597-3029-202F reel and bag packaging are marked with "rohs compliant" label or equivalent markings. these parts can be used with rohs reflow profile. parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260c temp. for 5 sec. tape specifications scale: 3.000 notes: 1. solder adherance: each pad per mil-std-202e, method 208c. 2. suffix -202f for 20-pcs on a sample strip. 3. suffix -207f for 180mm dia. reel, 8mm wide tape, packaged 2000 pcs per reel with a pitch of 4mm. 4. tape and reel as per eia standard 481-1, with cathode toward sprocket. 5. leds not designed for reverse operation. 6. dialight part number: 597-3xx9-20xf. 7. tape and reel leds may require re-taping after twelve months. 8. pin numbers for reference only, designation non-existent on part. 9. devices have a moisture sensitivity level of "2". caution label applied as per jedec std. 033. 10. chromaticity coordinates for white led at i f = 30 ma : x=0.30, y=0.28. 11. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling and storage in accordance with ipc-a-610. 12. do not use pads 2 & 3 for electrical contact. led schematic pad 4 cathode pad 3 anode pad 2 anode pad 1 anode esd protection diode cathode mark 1 2 3 4 cathode mark scale 4.000 (tolerances: # .002") solder resist cu-area>16mm^2 per pad recommended solder pad layout 1 2 3 4 see note 12 attention: observe precautions for handling electrostatic sensitive devices recommended rohs compliant reflow profile 120s max 100s max 25 $ c ramp up 3 $ c/s (max) maximum solder profile recommended solder profile minimum solder profile 255 $ c 240 $ c 217 $ c 0 50 100 150 200 250 300 s 50 0 100 150 200 250 300 $ c ramp down 6 $ c/s (max) 30s max 10s min 260 $ c +0 $ c -5 $ c 245 $ c # 5 $ c 235 $ c +5 $ c -0 $ c t t
|
